WARNING BRAKING
The use of the brake must be done smoothly, do not press
too hard on the brakes to avoid slippage or tilting.
It is not possible to operate the accelerator during the
action of one of the brake handles because the action of
the brake handles cuts the engine, this being intended to
prevent the risk of slippage and limit chances of losing
control of the balance bike.
The balance bike is equipped with two disc brakes for a safe
use experience.
The brake handle on the right handlebar activates the front
brake.
The brake handle on the left of the handlebar activates the
rear brake.
During the action of one of the brake handles this cuts the
electric motor preventing the effect of slippage and allowing a
faster and softer braking.
To Next Page
Loading...
