SHANGHAI ESURVEY GNSS CO., LTD.
25
5 Internal Radio
The device is equipped with 1 W internal radio. You can select the transmission power
from 0.5 W or 1 W. There are 8 default channel frequency in which channel 8 is
changeable. With firmware updated, lots of protocols in survey industrial are supported.
The default channel frequency is as follows:
The supported radio protocol includes the following:
Satel
PCC-4FSK
PCC-GMSK
TrimTalk 450S
South 9600
HiTarget(9600)
HiTarget(19200)
TrimMark III
South 19200
TrimTalk(4800)
GEOTALK
GEOMARK
900M Hopping
HZSZ
GEO FHSS
Satel_ADL
PCCFST
PCCFST_ADL
CAUTION: Some of the protocols may require firmware updating.