50
To turn on Fish I.D., press
MENU until the FISH ID menu appears. Press
↓ to select ON, then press PWR. Press MENU until the FISH ALARM menu
appears. Press
↑ to select ON, then press PWR.
To turn off fish alarm press
MENU until FISH ALARM appears. Press ↑ to
select
OFF, then press PWR to clear the menu.
Depth Alarms
The depth alarms are triggered only by the bottom signal. No other
echoes will activate these alarms. The depth alarms consist of a shal-
low and a deep alarm. The shallow alarm sounds an alarm tone when
the bottom goes shallower than the alarm's setting. The deep alarm
sounds a tone when the bottom goes deeper than its setting. Both
alarms adjust the same way, although through different menus.
Shallow Alarm
To set the shallow alarm depth, press MENU repeatedly until SHALLOW
ALARM appears.
Shallow Alarm Value Dialog box (left). Shallow Alarm menu (right).
Press ↓ to SET VALUE. The Shallow Alarm Value dialog box will appear.
Use ↑ ↓ to enter the first number in the dialog box, then press
DOWN
MENU
to move to the next digit. Repeat those steps until the desired
To Next Page
Loading...
Need help?
General
