Need help?Do you have a question about the Eagle IntelliMap Journey and is the answer not in the manual?
Instructions for installing the unit, considering clearance and mounting hardware.
Details on connecting the unit to a 12-volt battery system, including polarity and fuse.
Diagram and instructions for connecting cables for the Journey model, including antenna and NMEA.
Guidelines for mounting the GPS antenna, including surface mount and signal reception.
Information on installing the transom mount transducer for the Status unit.
Describes satellite status, signal acquisition, and finding the unit's position.
Details operating modes and navigation screen types (Nav-1, Nav-2).
Covers map display options, setup, details, trails, and icons.
Information on creating, managing, and navigating with waypoints and routes.
Configuration settings for system, GPS, alarms, and simulator functions.
Explains sonar modes, sensitivity, Grayline, Surface Clarity, and ASP settings.
Covers chart speed, stop, Fish ID, FishTrack, and chart display settings.
Details sonar alarms (Fish, Zone, Depth) and keel offset/speed calibration.
Troubleshooting steps for power, freezing, erratic operation, and signal problems.
Addresses issues with bottom echo, fish arches, and sources of sonar noise.
Recommendations for shipping and ordering accessories for Canadian customers.
Details for ordering accessories from LEI Extras for US customers.
To Next Page
General
