Eaglemaster AS-232T - Remote Function Operation; Remote Function Operation Steps; Programming Mode Entry and Exit

Note: "*" means factory setting before delivery
To enter programme mode and access Feature Change: Disarmed, turn ignition from ON to OFF and
within 2 seconds, simultaneously Pressing and hold + of the transmitter, until siren provide three chirps
to indicate that the system is enter programmable mode.
*Exit programme mode: There are 2 conditions to exit the mode : (1) Turn Acc ON , (2) Within 30 seconds without
any further programming. Siren will chirp twice to confirm the system has been programmed and exit in normal status
PROGRAMMABLE MODE TABLE
Press button Press button Press button
Press + button
PROGRAMME MODE OPERATE:
Ignition safety
door lock
Siren chirp
confirm
Siren chirp
confirm
Siren chirp
confirm
Siren chirp
confirm
Passive
Arming
Door unlock
pulse
AUX. Channel
output
WITH
*WITHOUT
*Normal
2 pulse
Chirp Once
Chirp Twice
Chirp Once
Chirp Twice
REMOTE FUNCTION OPERATE:
Functions Step Condition
Press + button
Siren chirp
confirm
Trunk open
&
Remote latched
Chirp Once
Chirp Twice
Arm and door lock
Arm without siren chirp
Disarm and door unlock
Disarm without siren chirp
Trunk open / Latched
Car search mode
All sensor bypass
Valet mode
Arm/Disarm chirp on/off
Auto re-arm on/off
Press once
Press once then within 3sec. press once
Press once
Press once then within 3sec. press once
Press over 2sec. / Press and hold
Press once after 8sec. of armed
Press once within 8sec. of armed
Press together over 2sec.
Press over 5sec. (Prog.)
Press together over 2sec.
Disarmed & ACC off
Disarmed & ACC off
Armed
Armed
Any time
Armed
Armed
ACC ON
ACC ON
ACC OFF-ON within 5sec.
Chirp Once
Chirp Twice
Chirp 3 times
*Without
With
With
Without door lock
With door lock
Press button
Siren chirp
confirm
Passive
Immobilizer
WITH
*WITHOUT
* For trunk open
pulsed 1sec.
Remote latched
Chirp Once
Chirp Twice
+
+
2nd immobilizer
Pager
Chirp Once
Chirp Twice
Chirp 3 times
*Window output