Eaglemaster E4 - Page 26

1-way remote reminder arm/disarm
status to 2-way remote
Press button
4-chirp
Press button
3-chirp
PROGRAMME FEATURES TABLE
Press button
2-chirp
W/O : means without the feature W/I : means with the feature
15sec.
3 min.
60sec.
5 min. 10 min.
W/O
*PIN
*W/O
Arming
w/engine
running
* Reverse
warning
w/i chirp
Reverse
warning
w/o chirp
Door
lock
AV sw
for 2nd step
disarm
2nd stage
door
unlock
Remote
latched
Press button
1-chirp
*8sec.
*1 min.
*W/I
*Valet
W/I
*Window
*Turbo
mode
*Trunk
Remote
latched
Trunk
Dome
Light
Pager
Dome
Light
Turbo
mode
Note: means factory default setting before delivery.
19 Red/black wire positive (+) input
12
11 Door switch arming delay
15 CH-4 (yellow/black) feature
16 Time for (engine run / turbo mode)
17 Door lock for Turbo mode
20
CH-5 (Gray/black wire) programme
output :
-Arming output 1~120sec..
-Press button + output 1~120sec.
14 CH-3 (white/black wire) feature
FEATURES
18 Emergency disarm by Valet SW / PIN
13 CH-2 (gray wire) feature
21 Factory default
Item
NO:
LED
flash
Press button once, siren give 1 long chirp
and all features back to factory default.
Press button once, siren will give 1-chirp and in
counting time , after your desire time if press button:
1. If press button once, siren will give 2-chirp
for programme time when arming.
1-2. If press button once, siren will give 2-chirp
for programme time by press buttons to activate.
2. After programmed step 1-1 or 1-2, if press
once, to jump next programme mode by siren
give 1 long chirp.
2-1. After programmed step 1-1 or 1-2, if press
button once, to programme pulse delay time 1~120
sec., after your desire time press button again.
It will auto jump to next item by give 1 long chirp.