Time adjust mode
Besides operating for alarm functions, LCD remote control additionally provides 12-hour
clock, alarm clock.
Instructions:
1. Press and hold Button for 3sec. to enter time-setup mode, 1 beep will be heard.
2. Press button to select Hour & Min adjust setting. Icon flashing to indicate.
3. Press button to turn up the numbers. Press button to turn down the numbers.
The button may be held down to scroll faster.
4. Press button to exit the setting mode. 2 beep will be heard.
Note: The remote will revert to normal operation from the set mode when 10-seconds has
elapsed without a button entry.
Minutes display
24-hour display
To Next Page
Loading...
