30
Slide the Flexi Fiber onto the nose of the device*. The open side
should go all the way down to the bottom of the nose. You want to
make sure the Flexi Fiber is on the device nice and tight every time
before you put them in your ear. You can do this by pushing and
twisting the Flexi Fiber down the nose towards the base. Then give
it a look to ensure that it’s all the way on the nose. If you can still
see some of the gray markings on the nose, the Flexi Fiber is not
on properly. Continue twisting the Flexi Fiber down the nose until
the gray markings are covered.
REPLACE WITH THE LARGE SIZE
*Caution:
Make sure that the Flexi Fiber is correctly attached. In rare cases, the
Flexi Fiber could remain in your ear when removing the Eargo device. If this
happens, have the Flexi Fiber removed by a healthcare professional.
To Next Page
Loading...
