If you notice wax or other debris on your Flexi Fibers, simply let
them dry (refer to page 51) and gently clean them with the cleaning
brush and/or micrfiber cloth provided in the Eargo box. The body
of the Eargo device, especially the nose, may also need cleaning.
We recommend you clean them in the morning after you’ve
charged them up overnight. Why? Well, put simply, ear wax is
easier to clean when cooled down and dried outside of those hot
ears of yours. That’s probably more than you ever wanted to know
about ear wax, but there it is.
We suggest you inspect your Eargo devices daily (ideally before
you put them in). If you see any wax on the microphone, Flexi
Fibers, the nose, contacts or body of the device please brush it off
or wipe away with cloth (the brush can be found in the Care Kit).
MICROPHONE • Using the cleaning
brush, clean the microphone area by
brushing across the back of the device
from side to side. Brush with the
microphone pointing down so gravity
will carry debris away from the device.
Gotta love gravity.
49
To Next Page
Loading...
