62
STEP 2
USE THE END TO REMOVE WAX GUARDS
Take the Eargo device between your thumb and index finger. With
your other hand, use the threaded side to gently twist the tool into
the nose of the Eargo device to grab onto the used wax guard.
*
The key word is gently. You don’t need to apply too much force.
Let the thread do all of the work here.
TWIST
STEP 3
Once the tool has grabbed onto the wax guard, pull firmly on
the tool to remove the wax guard from the device. Voila! Wax
guard removed.
*The wax guard is disposable. Do not attempt to clean or reuse a wax
guard. This could damage your hearing device.
To Next Page
Loading...
