EarthWay 2050SU - User Manual

To Next Page

80 lb Broadcast Spreader

with Side Spread Control

MODEL # 2050SU/2050P ASSEMBLY INSTRUCTIONS

2050Series_M52194_July2021 PAGE 1

SIDE SPREAD CONTROL

Patent U.S. 10,993,368

Your EarthWay spreader includes a patented

feature to prevent fertilizer from being spread

to the left side. To activate this feature, slide the lever

below the hopper to the back (if standing behind the

spreader) and position the left wheel 6″-12″ from your

sidewalk or border. This will not waste fertilizer like

competitor designs that leave 7X the fertilizer inside the

wheels from blocking material leaving the impeller.

ASSEMBLY

For assembly, flip up handle and tighten each wing nut to

hold handle in position

CUSTOMER SERVICE

SUPPORT@EARTHWAY.COM | www.EARTHWAY.com | 1009 Maple Street, Bristol, IN 46507

ONE YEAR WARRANTY

EarthWay Products, Inc. warrants this product free of defects in original workmanship and materials for a period of one year to the

end user with the original purchase receipt. If a manufacturing non-conformance is found, EarthWay Products, Inc. at its discretion

will repair or replace the part(s)/product at no charge provided the failure is not the result of incorrect installation, mishandling,

misuse, tampering, or normal wear and tear as determined by EarthWay.

EarthWay at its discretion may require that the part(s) or product be returned along with the original purchase receipt for

examination and compliance with the terms of this warranty. Do not return any product without first receiving authorization from

EarthWay Products, Inc.

To seek remedy under this warranty, contact EarthWay Products, Inc. at support@earthway.com or write to EarthWay

Products, Inc. 1009 Maple Street, Bristol, IN 46507 and describe the nature of the manufacturing defect. SPECIFIC

LIMITATIONS: This warranty covers only the part(s) or product; any labor charges associated with repair or replacement of

non-conformances are specifically excluded. Due to the corrosive nature of most fertilizers and ice melt products, EarthWay

Products, Inc. makes no warranty against and specifically excludes part(s) or product degradation or failure due to corrosion or

its effects.

Need help?

Do you have a question about the EarthWay 2050SU and is the answer not in the manual?

Summary

Side Spread Control Feature

Activating Side Spread Control

Instructions on how to activate the patented feature to prevent fertilizer spread to the left side.

Spreader Assembly

Handle Securing

Guidance on flipping up the handle and tightening wing nuts to hold it in position.

Parts Identification

Diagram and list of parts for the 80 lb (2050) Broadcast Spreader, crucial for assembly and operation.

Customer Support and Warranty

Customer Service Contact

Provides contact details including email, website, and mailing address for customer support.

One Year Warranty Terms

Details the one-year warranty against defects, repair/replacement process, and exclusions.

Ordering Spare Parts

Spare Parts Ordering Information

Information on how to order spare parts via phone or email.

The device described in the manual is an EarthWay 80 lb Broadcast Spreader with Side Spread Control, available in models 2050SU and 2050P. This is a manual push-type spreader designed for distributing various granular materials such as grass seed, fertilizer, and sand over large areas.

Function Description:

The primary function of this device is to evenly broadcast granular materials over a specified area. It operates by gravity feeding material from a hopper onto a spinning impeller, which then disperses the material. The "Side Spread Control" is a key feature, allowing the user to prevent material from being spread to the left side of the spreader. This is particularly useful for precise application along sidewalks, driveways, or garden borders, preventing waste and unwanted distribution of materials like fertilizer onto non-target areas. The manual highlights that this patented feature (U.S. Patent 10,993,368) is more efficient than competitor designs, which can leave significant amounts of material trapped within the wheels, blocking the impeller.

Important Technical Specifications:

Capacity: 80 lb, indicating the maximum weight of material the hopper can hold.
Models: 2050SU and 2050P. The parts list indicates differences in axle and wheel types between these models.
- Model 2050P uses a "10” PNEUMATIC DRIVE WHEEL" (Part #70106) and "AXLE (2050P)" (Part #23511).
- Model 2050SU uses a "10” WHEEL" (Part #12107), "AXLE (2050SU)" (Part #23510), "AXLE PLUG (2050SU)" (Part #12276), and "10 X 1" TYPE A PHPS BLACK (2050SU)" (Part #31148). This suggests the 2050SU might have solid or non-pneumatic wheels, potentially for different terrain or durability requirements.
Spreader Rate Settings: The manual provides a table for recommended settings based on material type and desired application rate (LBS PER 1000 SQUARE FEET).
- Grass Seed: Settings range from 9 (for 1 LB/1000 sq ft) to 20 (for 5 LB/1000 sq ft).
- Fertilizer (SGN 240 (3/32")): Settings range from 7 (for 1 LB/1000 sq ft) to 28 (for 8 LB/1000 sq ft).
- Fertilizer (SGN 150 (1/16")): Settings range from 7 (for 1 LB/1000 sq ft) to 22 (for 8 LB/1000 sq ft).
- These settings are crucial for accurate and efficient material application, preventing over- or under-application.
Components: The detailed parts list (80 POUND (2050) Broadcast Spreader Parts List) outlines numerous components, including:
- CONTROL ASSEMBLY (Part #60515)
- HOPPER ASSEMBLY (Part #60363)
- UPPER HANDLE ASSEMBLY (Part #60364) and LOWER HANDLE (Part #25220)
- AGITATOR (Part #33117)
- GEAR BOX ASSEMBLY (Part #60404)
- IMPELLER DISHED (Part #12248)
- SHUT OFF PLATE (Part #12221)
- STAND (Part #25701)
- Various bolts, nuts, pins, washers, and clips.
Optional Accessories: The diagram illustrates several optional components:
- Heavy-Duty Rain Cover #77003
- Screen #40003 (likely for filtering out clumps in the material)
- Salt Deflector Kit #77122 (suggesting the spreader can also be used for salt or ice melt, though with specific warranty limitations).

Usage Features:

Assembly: The manual provides a simple assembly instruction: "flip up handle and tighten each wing nut to hold handle in position." This suggests a relatively straightforward and quick setup process.
Side Spread Control: To activate this feature, the user slides a lever below the hopper to the back (when standing behind the spreader). This allows for precise application by positioning the left wheel 6"-12" from a sidewalk or border, preventing material from being spread to the left. This is a significant feature for environmental responsibility and cost-saving by avoiding material waste.
Rate Settings: The inclusion of a detailed spreader rate settings table allows users to accurately calibrate the device for different materials and desired application densities, ensuring optimal results for lawn care or other spreading tasks.
Maneuverability: As a push-type spreader, its maneuverability depends on the user's effort and the terrain. The presence of pneumatic wheels on the 2050P model suggests better handling over uneven ground compared to potentially solid wheels on the 2050SU.

Maintenance Features:

Spare Parts Availability: The manual explicitly states "HOW TO ORDER SPARE PARTS – CALL or EMAIL: TURF DEPOT 800-305-9255 or earthway@turfdepot.com". This indicates that individual components are available for replacement, extending the lifespan of the spreader. A comprehensive parts list with part numbers and descriptions is provided for easy identification.
Warranty: The device comes with a ONE YEAR WARRANTY from EarthWay Products, Inc. This covers defects in original workmanship and materials for the end user with the original purchase receipt.
- Coverage: Repair or replacement of part(s)/product at no charge if a manufacturing non-conformance is found, provided the failure is not due to incorrect installation, mishandling, misuse, tampering, or normal wear and tear.
- Process: To claim warranty, users must contact support@earthway.com or write to EarthWay Products, Inc. at 1009 Maple Street, Bristol, IN 46507, describing the defect. Authorization is required before returning any product.
- Limitations: The warranty specifically excludes labor charges for repairs. Crucially, it makes no warranty against and specifically excludes part(s) or product degradation or failure due to corrosion or its effects, particularly due to the corrosive nature of most fertilizers and ice melt products. This limitation is a critical maintenance consideration, implying that thorough cleaning after use, especially with corrosive materials, is essential to prevent damage not covered by the warranty.

In summary, the EarthWay 80 lb Broadcast Spreader is a robust and user-friendly tool designed for efficient and controlled distribution of granular materials. Its key differentiator is the patented Side Spread Control, which enhances precision and reduces waste. While assembly is simple and spare parts are available, users must be mindful of the warranty limitations regarding corrosion, emphasizing the importance of proper cleaning and care, especially when using corrosive fertilizers or ice melt.