25 lb Broadcast Bag
Spreader / Seeder
MODEL # 2750 ASSEMBLY INSTRUCTIONS
2750_MAR2024
On behalf of our entire team, we
thank you for choosing
EarthWay.
Your 2750 Seeder / Spreader is
pre-assembled at the factory,
leaving only the handle crank for you to attach.
When attaching the crank, thread the crank onto
crankshaft by turning the hex nut clockwise two
revolutions. It is not necessary to tighten, the crank
will tighten itself as you use it.
Your Earthway 2750 is now ready for use!
RATE SETTINGS
Type Spread
Width (ft)
Setting LBS/Acre Type Spread
Width (ft)
Setting LBS/Acre
Alfalfa 18 2 ½ 20 Timothy 25 1 2 ¾
Atla Fescue/Kentucky 31 11 3 ½ 5 Wheat 14 4 ½ 90
Birdsfoot Trefoil 20 1 ¾ 4 Yello Mustard 20 2 ½ 7 ⅔
Clovers 18 2 ¼ 8 Imperial White Tall Clover 18 1 ¾ 8
Flax or Miller 18 2 ½ 25 Bermuda 7 ½ 2 ½ 2 ¼
Hairy Vetch 18 3 ½ 20 Coarse Mix 12 4 ½ 1
Kentucky Bluegrass 8 3 ½ 49 ½ Fine Mixture 10 3 ½ 4
Lespedeza – Unhulled 16 2 15 Merlon Blue 7 ½ 2 ½ ¼
Lespedeza – Hulled 16 2 12 Rye Grass 13 4 ½ 1
Oats 16 5 ½ 64
Orchard Grass 10 2 ½ 14
Red Top 10 1 ½ 6 Granular 18 4 ½ 2
Rape 21 2 ½ 6 ¾ Slow Release Nitrogen 14 4 ½ 3
Sweet Sudan Grass 24 3 ¾ 25 Pellet Type 28 4 ½ 1
*Note that the fertilizer is measured in LBS/1,000sq ft.
To Next Page
Need help?
General
