20
/ USER’S GUIDE E8 / E8-B
Press button II for 0.5 second
to increase “minute” and
press it continually to increase
“minute” continually.
If you press button (I+III) for
2 seconds again after setting
the timer, the display of timer
does not flash to inform you that setting is complete and it
displays the current time again.
In case that you do not press any button for 20 seconds, it
automatically displays the current time.
15. Turbo
15-1 (E8 Model)
Press (III+IV) for 2 seconds,
then the icon blinks. In this
mode, engine continues to
run for a selected time of 30
seconds or 2 minutes (you
can change the setting in
Option menu). This is very
useful for turbo charged vehicles to cool down the
mechanical components after driving.
15-2
(E8-B Model)
Press (III+IV) for 2 seconds, then the icon blinks. In this mode,
engine continues to run for a selected time of 30 seconds or 2
minutes (you can change the setting in Option menu).
E8 수출 사용설명서 내지 4/3/12 6:36 PM 페이지20
To Next Page
Loading...
