Easycar E8 - Time Setting Functions; Current and Reserved Time Adjustment

USER’S GUIDE E8 / E8-B /
25
same process once again.
22. Other Remote Functions ON/OFF mode
22-1 Current time Change
Press button (I+II) for 2 seconds and then current time
flashes.
Press button I for 0.5 second to increase “hour” and press it
continually to increase “hour” continually.
Press button II for 0.5 second to increase “minute” and press
to cancel the setting, press button IV for 0.5 second.
If you press button (I+II) for 2 seconds again after setting the
current time, the display of current time does not flash to
inform you that setting is complete.
In case that you do not press any button for 10 seconds, it
automatically displays the current time.
22-2 Reserved Time Change
Press button (I+III) for 2 seconds and then timer flashes.
Press button I for 0.5 second to increase “hour” and press it
continually to increase “hour” continually.
Press button II for 0.5 second to increase “minute” and press
it continually to increase “minute” continually.
If you press button (I+III) for 2 seconds again after setting
the timer, the display of timer does not flash to inform you
that setting is complete and it displays the current time again.
In case that you do not press any button for 10 seconds, it
automatically displays the current time.
E8 수출 사용설명서 내지 4/3/12 6:36 PM 페이지25