USER’S GUIDE E8 / E8-B /
29
25-2 How to input the 4 digit password
ⓐ Turn the engine off, and place the car key to the ON
position. Open the door and wait until the light moves
from number 1 LED.
ⓑ Number 1 LED will be on for 2 seconds and OFF, and it
will repeat on each number from 2 to 0.
ⓒ If you knock once while your desired number LED
lights up, LED will flash and repeat step 2 above.
ⓓ You have to repeat the step 2 and 3 for 3 more times to
enter a 4 digit password.
For Example, if your desired password is 2, 3, 4, and 5, then
wait until number 2 LED lights up and gently knock on the
sensor. After this, number 1 LED will light up and
continuously move to next number, and knock on the sensor
when number 3 LED lights up. Repeat this process for
number 4 and 5 to finish enter your password.
25-3 Door Lock / Unlock
ⓐ Wait, the light moves from number 1 LED
during lock, unlock or valet mode.
ⓑ Number 1 LED will be on for 2 seconds and off, number
2 led will be on 2 seconds and off, and it will
continuously move around to 0.
ⓒ Knock on the sensor once on your first digit of your
password, light will flash once more to confirm the
recognition.
ⓓ Repeat the step 3 for your second, third and forth number
of your password.
ⓔ After your forth password, vehicle will lock (if it was
E8 수출 사용설명서 내지 4/3/12 6:36 PM 페이지29
To Next Page
Loading...
