26
/ USER’S GUIDE E8 / E8-B
23. Adjusting the sensitivity of shock sensor
Please ask your installer for the location of your shock
sensor. You can adjust the sensitivity of the shock sensor by
turning the knob on the shock sensor. Turn the knob on the
shock sensor clockwise for higher sensitivity and counter
clockwise for lower sensitivity.
Note
Do not turn the knob with excessive force, or beyond its limit.
Shock sensor is fragile.
24. Reservation mode
(For Manual Transmission Vehicle)
24-1 What is ‘Reservation mode”?
In order to remote-start your
manual transmission vehicle,
you must first set up
reservation mode before
leaving your vehicle. The
purpose of leaving the
E8 수출 사용설명서 내지 4/3/12 6:36 PM 페이지26
To Next Page
Loading...