45
After each disinfection
1. Insert test strip Is meter powered on? Yes
Any reading? Yes 2. Apply control solution
Is the reading within control range? Yes
3. Remove test strip Is meter powered off? Yes
Is meter powered on? Yes
4. Press and hold power
button for 3 sec.
Does meter beep? Yes
Is it correctly stored in the memory? Yes
5. Press and release C or
M button.
Does the result read clearly? Yes
Action: If any of the results are “No”, stop using the device. Please call the Customer Care Service toll-free
at 866-994-3345 (Eastern Standard Time, Mon-Fri 8:00AM~6:00PM) for replacement with a new
meter.
2-1. Physical Appearance check of the lancing device after each cleaning or disinfection
Check item Accept Result
Is there NO erosion on any parts? Yes
Action: If any of the results are “No” the user should call the Customer Care Service toll-free at
866-994-3345 (Eastern Standard Time, Mon-Fri 8:00AM~6:00PM) for assistance.
To Next Page
Loading...
