EasySMX Arion 9101 - Charging the Game Controller; Connecting to PS3 Console

Charging
1. To charge, use the included USB cable to plug the gamepad into your PC.
2. If the game controller is connected to some device during charging, the corresponding LED
indicator will flash slowly. If the gamepad is fully charged, the LED indicator will stay on.
3. If the gamepad is not connected to any device, all 4 LED indicators will flash slowly during charging.
They will turn off when the gamepad is fully charged.
Note: if the game controller is running low on batteries, the corresponding LED indicator will flash.
Connect to PS3
1. Plug the receiver into one free USB port on the PS3 console. Press the Home Button once to power
on the gamepad and it will auto connect to the PS3 console.
2. PS3 console is available for 7 game controllers. Please see the table below for a detailed explana-
tion for LED status.
Game Controller
First One
Second One
Third One
Fourth One
Fifth One
Sixth One
Seventh One
04
LED Status
LEDI stays on
LED2 stays on
LED3 stays on
LED4 stays on
LEDI and LED4 stay on
LED2 and LED4 stay on
LED3 and LED4 stay on