Eaton 1000H(XL) - Appendix 1: Display Panel (6000 H;10000 H); Indicator LED Functions; Load;Battery Capacity LED Indicators

３２
18. Appendix 1－Display Panel (for 6000H(XL)/10000H(XL))
 Power ON/OFF: To turn on the UPS simply by pressing the “ON” button on the front panel
continuously for 1 second. Press the “OFF” button on the front panel continuously for 1
second to turn off the UPS.
 Bypass LED (orange LED): Whenever the bypass LED is turned on, it shows that the loading
current is supplied directly from the utility power.
 Utility power LED (green LED): Whenever the utility power LED is turned on, it shows that the
utility power is normal.
 Inv LED (green LED): Whenever the INV LED is turned on, it shows that the loading current is
supplied from utility power or battery via the inverter.
 Battery LED (orange LED): Whenever the battery LED is turned on, it shows that the loading
current is supplied from battery via the inverter.
 Fault LED (red LED): Whenever the fault LED is turned on, it shows that the UPS is in abnormal
condition.
 #2-#6 LEDs (the #2 LED is orange and the #3-#6 LEDs are green): These LEDs indicate the
percentage of the load capacity in utility power mode or battery capacity level in battery mode.