Eaton 5P1000RC - Battery Module Connection

Page 13
5P 750VA-1.5 KVA US_EN
3.2 Battery module connection
Cauti
on: Before starting the UPS, please connect the internal battery.
.
A. Remove the center panel
B. Remove the left-hand side of
the front panel
C. Connect the battery module
(never pull on the wires)
D. Attach the left-hand side of the
front panel by sliding it then by
locking the push button
E. Attach the center panel
○
A
○
B
○
C
○
E
○
D