To Next PageTo Next Page
Need help?Do you have a question about the Eaton 5PX 1500i RT2U and is the answer not in the manual?
General| Power Rating | 1500 VA / 1350 W |
|---|---|
| Output Voltage | 230V |
| Input Voltage | 230V |
| Rack Height | 2U |
| Operating Temperature | 0 to 40°C |
| Battery Type | Sealed, lead-acid |
| Communication Ports | USB, RS-232 |
| Topology | Line Interactive |
| Input Voltage Range | 160-294 V |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz +/- 0.1 Hz |
| Outlets | 8 IEC C13 |
| Network Management | Optional Network Management Card |
| Typical Recharge Time | 3 hours |
| Operating Humidity | 0 - 95% (non-condensing) |
| Efficiency | Up to 99% |
Explains the graphical LCD and buttons on the UPS control panel.
Lists configurable parameters like language, output voltage, and sensitivity.
Instructions for mounting the UPS vertically using provided supports.
Steps for installing the UPS horizontally in a standard 19-inch rack.
Details on connecting RS232/USB ports and installing optional communication cards.
Identifies possible causes and actions for UPS operational problems.
Safety precautions and step-by-step instructions for replacing battery modules.
