2. Presentation
2.3 Control panel
The UPS has a ve-button graphical LCD. It provides useful information about the UPS itself, load status,
events, measurements and settings.
Power On
Indicator (green)
On battery
Indicator (yellow)
Alarm
Indicator (red)
Escape Up Down Enter On/Off
button
The following table shows the indicator status and description :
Indicator Status Description
Green
On The UPS is operating normally
Yellow
On The UPS is on battery mode
Flashing The battery voltage is below the warning level
Red
On
The UPS has an active alarm or fault. See trouble-
shooting on page 18 for additional information.
To Next Page
Loading...
