To Next PageTo Next Page
Need help?Do you have a question about the Eaton 5PX 2200i RT2U and is the answer not in the manual?
General| Power Rating | 2200 VA / 1980 W |
|---|---|
| Output Voltage | 230V |
| Input Voltage | 230V |
| Interface | LCD |
| Topology | Line Interactive |
| Frequency | 50/60 Hz |
| Form Factor | Rack/Tower |
| Battery Type | Sealed Lead Acid |
| Input Voltage Range | 160-294V |
| Efficiency | Up to 98% |
| Output Connections | 8 x IEC C13, 2 x IEC C19 |
| Input Connection | IEC C20 |
| Height | 86.5 mm |
| Communication Ports | USB, Serial, Relay, SNMP |
| Runtime at Full Load | 5 minutes |
| Warranty | 2 years |
Highlights symbols for electric shock, battery/WEEE disposal, and general information.
Steps for powering on the UPS and confirming normal operating status.
Guides for diagnosing and resolving common UPS operational issues.
Step-by-step instructions for safely replacing the UPS battery modules.
Specific maintenance procedures for UPS units equipped with HotSwap MBP.
