To Next PageTo Next Page
Need help?Do you have a question about the Eaton 5PX 3000i RT2U and is the answer not in the manual?
General| Power Rating | 3000 VA / 2700 W |
|---|---|
| Rack Height | 2U |
| Input Voltage | 230V |
| Output Voltage Regulation | +/- 1% |
| Topology | Line Interactive |
| Form Factor | Rack/Tower |
| Output Voltage | 230V |
| Input Frequency | 50/60 Hz +/- 3 Hz |
| Output Frequency | 50/60 Hz |
| Outlets | 8 IEC C13 |
| Communication Ports | USB, RS-232 |
| Network Management | Optional network card (Eaton Network-M2) |
| Battery Type | Sealed lead-acid (SLA) |
| Typical Recharge Time | 3 hours |
| Operating Temperature | 0-40°C |
| Operating Humidity | 0-95% non-condensing |
Overview of the UPS control panel, including indicators, buttons, and their functions.
Explains how to navigate menus and access various UPS settings and functions.
Guides users through unpacking the UPS and identifying all included components.
Details the procedure for starting the UPS and verifying normal operation status.
Lists common UPS issues, their possible causes, and recommended actions.
Specific troubleshooting steps for UPS units integrated with the HotSwap MBP module.
Provides safety precautions and step-by-step instructions for replacing UPS batteries.
