What to do if the Eaton UPS load is no longer supplied if AC power fails?
If your Eaton UPS load is no longer supplied when AC power fails, ensure that the rotary switch on the HotSwap MBP module is set to the Normal position. Also, verify the wiring between the UPS and the HotSwap MBP module.
What to do if Eaton UPS load isn't supplied when the rotary switch is in the Normal position?
If the Eaton UPS load is no longer supplied when the rotary switch on the HotSwap MBP module is in the Normal position, first, try starting the UPS. If that doesn't work, check the wiring between the UPS and the HotSwap MBP module.
What to do if the Eaton 700 load is no longer supplied in Normal position?
If the load is no longer supplied when the rotary switch on the Eaton UPS HotSwap MBP module is in the Normal position, first ensure that the UPS is started. Also, check the wiring between the UPS and the HotSwap MBP module.
General| Form Factor | Tower |
|---|---|
| Power Rating | 700 VA |
| Output Voltage | 230 V |
| Battery Type | Sealed Lead-Acid (SLA) |
| Communication Ports | USB |
| Frequency | 50/60 Hz |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -15 to 45°C |
| Humidity | 0% to 95% non-condensing |
To Next Page
