Eaton 93PM-50-1 - Bypass Mode Operation

Eaton 93PM Emergency Lighting UPS (50 kW, 480V Three and Four-Wire UL 924) Installation and Operation Manual P-164000569—Rev 03 49
14. If removed, reinstall the sidecar front panel and secure with the retained hardware.
15. Close the UPS outside door and secure the latch.
Figure 29. Thermal Sensor Terminal Location
Thermal Sensor Terminals
Figure 30. Thermal Sensor Terminal Assignments
ThermalSensor
ThermalSensor Return
Jumper
Jumper
ThermalSensor
TB11
UPS System Installation