For transportation purposes, the battery cabinet is bolted onto two wooden
beams. To remove the pallet, perform the following procedure:
1. Before you unload the cabinet
from the pallet, use a forklift or
other material handling
equipment to move the cabinet
to the installation area. Insert
the forks of the forklift from the
front of the cabinet.
2. Make a visual inspection and
check that there are no signs of
shipping damages. Check the
indicators. See the instructions
next to the indicators on the
package.
3. Remove the packaging.
4. Open the cabinet door.
Eaton 9PHD Accessory Cabinets TFC-A, EBC-F
and EBC-G User's and installation guide
©
Eaton Corporation plc 2022. All rights reserved. Document ID: P-164000538 26 (63)
To Next Page
Loading...
