To Next PageTo Next Page
Need help?Do you have a question about the Eaton 9PX 6000 and is the answer not in the manual?
General| Power Rating | 6000VA/5400W |
|---|---|
| Output Voltage | 230V |
| Topology | Double Conversion Online |
| Input Frequency | 40-70 Hz |
| Output Frequency | 50/60 Hz |
| Output Power Factor | 0.9 |
| Typical Recharge Time | 3 hours to 90% |
| Efficiency | 96% |
| Battery Type | Sealed, lead-acid |
| Communication Ports | USB, RS232 |
| Network Management | Optional Network Management Card (NMC) |
| Form Factor | Rack/Tower |
Details critical safety precautions for personnel, including voltage backfeed, grounding, and battery handling.
Covers safe installation practices, accessible circuit breakers, and environmental considerations for the UPS.
Provides specific handling guidelines, advice on battery replacement, and emphasizes authorized service personnel.
Step-by-step instructions for connecting EBMs to the UPS, including power and detection cables.
Instructions for placing the UPS in a stable vertical (tower) configuration.
Details recommended upstream protection devices and required cable cross-sections.
Procedure for connecting the UPS to a single AC input source, emphasizing ground connection first.
Procedure for connecting the UPS to separate Normal AC and Bypass AC input sources.
Detailed steps for powering on the UPS and shutting it down safely.
Explains the UPS operation in Online, Battery, Bypass, and Standby modes.
Detailed procedure and safety precautions for replacing the UPS batteries.
Steps for safely replacing EBMs, including handling precautions and cable connections.
Procedure for servicing or replacing the UPS unit when equipped with a HotSwap MBP.
A chart detailing common UPS conditions, their possible causes, and recommended actions.
