Do you have a question about the Eaton 9PX Lithium-Ion and is the answer not in the manual?
Model | 9PX Lithium-Ion |
---|---|
Topology | Double Conversion |
Frequency | 50/60 Hz |
Output Power Factor | 0.9 |
Battery Type | Lithium-Ion |
Operating Temperature | 0 to 40 °C |
Type | Online Double Conversion |
Power Rating | 1 kVA to 3 kVA |
Power Capacity | 1000 VA to 3000 VA |
Input Voltage | 200-240V (depending on the specific model) |
Output Voltage | 230V |
Typical Recharge Time | 2 hours |
Communication Ports | USB, Serial (RS-232) |
Network Management | Web/SNMP |
Form Factor | Tower/Rackmount |
Humidity | 0-95% non-condensing |
Runtime at Half Load | Varies by model (typically 5-15 minutes) |
Dimensions (H x W x D) | Varies depending on the specific model (consult specific model datasheet) |
Weight | Varies by model (typically 15-50 kg) |
Alerts to important information using symbols.
Guidelines for handling batteries safely to avoid shock or burns.
Precautions for safe installation and operation of the UPS unit.
Welcome and overview of the 9PX UPS features and manual.
Eaton's commitment to eco-design and recycling of packing materials.
Illustrates tower and rack installation methods and provides dimensions.
Details the various ports and connectors on the rear of UPS models.
Lists and describes available UPS accessories and their part numbers.
Describes the five-button graphical LCD and its functions.
Explains the meaning of different LED indicators on the UPS display.
Details UPS states and how to navigate display menus.
Overview of settings adjustable by the user via the UPS interface.
Detailed configuration options for LCD, output voltage, etc.
Options for energy saving, sleep mode, and power off alerts.
Configuration of input signals and programmable output signals.
Settings for battery notice delay and defining general alarm triggers.
Procedures for checking UPS for damage and filing claims.
Checklist of accessories included with UPS and EBM units.
Step-by-step guide for connecting the UPS internal battery pack.
Instructions for setting up the UPS in a vertical (tower) orientation.
Steps for mounting the UPS unit into a standard 19-inch rack.
Guide for connecting up to four EBMs to the UPS for extended runtime.
Guidance on connecting additional optional UPS accessories.
How to connect the UPS to power and loads without an MBP module.
How to connect the UPS with an optional HotSwap MBP module.
Instructions for using the HotSwap MBP module's switch and testing.
Connecting the UPS to a computer using serial or USB ports.
Configuring programmable signal inputs for remote UPS control.
Detailed connection and operation for RPO and ROO remote control.
Configuring signal outputs for UPS status notifications.
Overview of available communication cards for networking the UPS.
Steps to safely start the UPS and verify normal operation.
How the UPS operates during power outages and procedures for shutdown.
Descriptions of Online, Battery, and Bypass operating modes.
UPS behavior upon AC power return and High Efficiency mode settings.
Configuration options for UPS bypass behavior and synchronization.
Settings for low battery warning and battery restart level.
Procedures for accessing and reviewing the UPS event and fault logs.
Guidelines for long-term storage and battery recharging.
Critical safety precautions and steps for replacing internal UPS batteries.
Procedures for replacing the UPS unit without interrupting load power.
Information on proper disposal of used UPS and battery components.
Identifies common alarms, faults, their causes, and recommended actions.
How to silence alarms and the importance of addressing the underlying condition.
Contact information and required details for technical support.
Lists power ratings and extended battery module compatibility.
Details input/output voltages, currents, frequencies, and efficiency.
Lists certifications, operating temperatures, humidity, and altitude limits.
Details battery types, voltage, monitoring, and cable length.