Eaton 9PX Lithium-Ion - Battery Notice and General Alarm Settings

12 Eaton 9PX Lithium-Ion P-164001006—Rev 01
Table 6. User Settings (Continued)
Submenu
Available settings Default settings
[Group 2] [Group 1 + Group 2]
[OFF delay]: [0s] …[999s] OFF delay: [0s]
[Restart]: [Yes] [No] Restart: [Yes]
On battery
notice delay
[0s] ... [99s]
Sets delay before noticing on battery
information to software.
[0s]
General alarm
[On battery] [Battery fault] [Internal fault]
[Overload pre-alarm] [Internal fault]
[Ambient temp.] [Fan lock]
[Bypass overload] [Current limit]
[Short circuit] [Inverter overload]
[Power overload] [Low battery]
[On bypass] [UPS OK] [Load protected]
[Load powered] [Ext. charger ON]
Defines which event or fault generate
a general alarm through Output signal
screen.
User Settings