Eaton 9SX 15K Series - Page 40

40
3.3.3 Mode 3-3(single source) ：
1. Input:
I. Connect the main-ground cable (PE) to the chassis
II. Bridge the ‘AC input terminal N/N/N’ with ‘busbar #9’, then connect the AC cable
(N) to it
III. Bridge the ‘AC input terminal mL1/bL1’ with busbar #10’, then connect the AC
cable (L1) to it
IV. Bridge the ‘AC input terminal mL2/bL2’ with busbar #10’, then connect the AC
cable (L2) to it
V. Bridge the ‘AC input terminal mL3/bL3’ with busbar #10’, then connect the AC