Eaton 9SX 20KPM Series

To Next Page

To Previous Page

Recommended output circuit breaker current specifications:

Model name

Output mode

Breaker current

9SX 15KPM(AU)

1 phase output

100A

3 phase output

40A

9SX 20KPM(AU)

1 phase output

125A

3 phase output

63A

Note: The diameter and cross-section of the cable conductor depend on the

rated power of the UPS. The above wire diameter is for user's reference only.

Layout of the Power Module’s terminal block (TB):

Note:

1. UPS input TB (PE/N/N/L1/L2/L3)

2. UPS bypass input TB(L1/L2/L3)

3. UPS output TB(PE/N/N/L1/L2/L3)

4. External battery TB(PE/+/N/N/-)

This section outlines the 8 different possible modes of input/output wiring

application. The below copper busbars and jumper cable are included as

accessories to change to input/output modes.

To gain access to the terminal blocks, it is only necessary to remove the

terminal block’s top cover, without removing the whole box.

Eaton 9SX 20KPM Series - Page 25