What to do if the MBP is disconnected from my Eaton UPS?
The HotSwap MBP is no more connected to the UPS. If the HotSwap MBP is connected to the UPS, check that the detection connector is correctly plugged.
Lists safety and EMC certification standards followed by the UPS.
Explains symbols used in the manual for warnings and information.
Details the manufacturer's environmental policy, including substances, packing, and end-of-life.
Describes standard tower and rack installation configurations with dimensions.
Identifies and describes the connectors and ports on the rear of the UPS units.
Lists optional accessories available for the UPS models.
Explains the UPS front panel's LCD and button layout for operation.
Details the information displayed on the UPS LCD screen for various operating states.
Explains how to navigate the UPS menu and access different functions.
Outlines the configurable user settings for the UPS operation and display.
Instructions for checking equipment for shipping damage and verifying battery status.
Procedures and precautions for safely unpacking the UPS unit.
Verifies the inclusion of all necessary accessories with the UPS and EBM.
Step-by-step guide for connecting Extended Battery Modules (EBMs) to the UPS.
Refers to other manuals for connecting additional UPS accessories.
Instructions for installing the UPS in a tower configuration.
Detailed steps for mounting the UPS into a standard 19-inch rack.
Specifies required upstream protection devices and cable cross-sections.
Diagrams illustrating installation based on system earthing configurations.
Instructions on how to access the UPS terminal blocks for wiring.
Procedures for connecting the UPS power input and output cables.
Step-by-step guide for starting up and shutting down the UPS unit.
Explains the different operating modes of the UPS (Online, Battery, Bypass, Standby).
Instructions on how to switch the UPS between different operational modes.
Guide to configuring the UPS for High Efficiency mode operation.
Details on how to configure the bypass operation parameters.
Explains settings related to automatic battery testing and warnings.
Instructions on how to access and view the UPS event log.
Instructions on how to access and view the UPS fault log.
Describes the RS232, USB, and relay output communication ports.
Explains the remote on/off functionality and connection.
Details the remote power off feature and its connection requirements.
Lists and describes available communication cards for enhanced connectivity.
Overview of the Eaton software for UPS monitoring and management.
Guidelines for cleaning and maintaining the UPS equipment for optimal performance.
Instructions for proper storage of the UPS, including battery charging.
Indicates when battery replacement is recommended based on UPS display.
Provides safety precautions and steps for replacing UPS batteries.
Instructions for safely replacing Extended Battery Modules (EBMs).
Steps for servicing or replacing the UPS with HotSwap MBP without load interruption.
Guidelines for the proper disposal and recycling of UPS and batteries.
Identifies common alarms and faults and suggests troubleshooting actions.
Instructions on how to silence audible alarms on the UPS.
Information on how to contact customer support and required details.
Detailed technical specifications for UPS models, electrical characteristics, and dimensions.
To Next Page
General
