Eaton Cutler-Hammer SPB - Alarm Contacts; Seismic Tested and Approved Product Mounting Instructions

I.B. ATS-CP01
Page 17
Effective 5/98
ALARM CONTACTS
Closed transition automatic transfer switches are provid-
ed with 4 N.O. and 4 N.C. contacts (KA) for remote
alarming. These contacts are energized when the
TDUP (Time Delay Utility Parallel) times out (preset by
user). The TDUP timer starts timing when both sources
are paralleled. Refer to the IQ Transfer instruction book
for additional alarms.
These cleats must be
ATVISP, NTVSSP
Figure 4-4 Seismic Tested and Approved Product Mounting Instructions
CTVISP