I.B. 17555C
Effective November 1999
Page B2
Fig. B-1 Digitrip 3000 with DSPS
NOTE: The following material replaces section 2-3, pages 16 & 17.
TABLE B-2 DT3010 AND DT3020 SPECIFICATION AND TEST SUMMARY
COMPLIANCE TESTING:
Certifications:
• UL Recognized, File # E154862
• UL 1053 (1994)
• ANSI C37.90 (1989)
• EN 55011 (1991)
Emission Tests:
• EN 55011 (1991) – Group 1 Class A
• FCC 47 CFR Chapter 1 - Part 15 Subpart b Class A
Immunity Tests:
• ANSI C37.90.1 (1989) - Surge Withstand Capability
• EN 61000-4-2 (1995) - ESD Rating of 8kV
• IEC 255-22-2 (1989) - ESD Rating of 8kV
• EN 61000-4-3 (1997) – Radiated EM Field at 10V/m
• IEC 255-22-3 (1989) - Radiated EM Field at 10V/m
• IEC 801-3 (1984) - Radiated EM Field at 10V/m
• EN 61000-4-4 (1995) – Fast Transient Burst at 2kV
• IEC 255-22-4 (1992) - Fast Transient Burst at 2kV
• EN 61000-4-6 (1996) - Conducted RF at 10V/m
PHASE AND GROUND TIME-CURRENT CURVES:
• Thermal It [Moderately Inverse]
I2t [Very Inverse]
I4t [Extremely Inverse]
Flat [Definite Time]
• ANSI: Moderately Inverse
(Per ANSI C37.112, 1996) Very Inverse
Extremely Inverse
• IEC: IEC-A [Moderately Inverse]
(Per IEC 255-3, 1989 IEC-B [Very Inverse]
IEC-C [Extremely Inverse]
IEC-D [Definite Time]
CONTROL POWER:
• Input Voltage: Nominal
Operating Range
DT3010: 100 - 120Vac 70 – 132Vac, (50/60Hz)
DT3020: 200 - 240Vac 140 - 264Vac, (50/60Hz)
• Power Consumption: 15VA maximum
To Next Page
Loading...
