Eaton E DX Series - Safety and EMC Instructions; Installation; Operation; Maintenance

1. Brief introduction
--1--
1.1 System and model description
This Online Series is an uninterruptible power supply incorporating double-conversion
technology. It provides perfect protection especially for computer equipment and
communication systems of computerized instruments.
Its true online double-conversion design eliminates all mains power disturbances. A rectifier
converts the alternating current from the utility power to direct current. This direct current
charges the batteries and powers the inverter. On the basis of the DC voltage, the inverter
generates a pure sinusoidal AC voltage, which is constantly powering the loads.
Computers and Peripherals are thus powered entirely by the UPS. In the event of power
failure, the maintenance-free batteries power the inverter.
This manual is designed for the product that the model designation rules as followed:
Eaton E Series DX 1000H (X) (XL)
Brand name
UPS series
Output capacity(VA)
Code Batteries internal or external
Nil
Standard model with batteries internal
XL
Long backup time model with batteries external
Special code means receptacle and plug type
Code
Voltage level
H 220-240V~
The description followed in this manual is applicable to Eaton DX 10000HXL, DX 15000HXL
and DX 20000HXL.This series are three-phase input and single-phase output long backup
time, which are able to connect with the external battery bank.
PDF created with pdfFactory Pro trial version www.pdffactory.com