What to do if Eaton E DX FAULT LED lights up and warning alarms once a second?
If the Eaton UPS FAULT LED lights up and a warning alarm sounds once per second, it indicates an overload. To resolve this, remove some of the connected devices from the UPS output.
Why is the emergency supply period shorter than nominal value on my Eaton E DX UPS?
If your Eaton UPS emergency supply period is shorter than expected, it could be due to batteries not being fully charged or defective batteries. Charge the batteries for at least 1-2 hours and then check their capacity. If the problem persists, it is recommended to consult with your dealer.
General| Topology | Double Conversion Online |
|---|---|
| Output Frequency | 50/60 Hz |
| Input Voltage | 200-240V |
| Battery Type | Sealed Lead-Acid (SLA) |
| Communication Ports | USB, RS232 |
| Operating Temperature | 0°C to 40°C |
| Form Factor | Tower/Rack |
Guidance on proper installation of the UPS to ensure safety and optimal performance.
Instructions on how to operate the UPS safely and correctly.
Procedures for maintaining the UPS for longevity and safety.
Guidelines for safe transportation of the UPS unit.
Recommendations for storing the UPS unit correctly.
Important warnings and precautions for using the UPS.
Explanation of symbols used throughout the manual for better understanding.
List of international standards and certifications the UPS complies with.
Overview of the UPS system's indicators, switches, and display elements.
Steps for unpacking the UPS and checking the package contents.
Important considerations and precautions before installing the UPS.
Detailed instructions for installing the 1000H, 2000H, and 3000H models.
How to connect a computer to the UPS for monitoring or management.
Detailed instructions for installing the 6000H and 10000H models.
Step-by-step guide to powering the UPS on and off.
How to manage and operate parallel UPS systems for higher capacity.
Detailed electrical specifications for different UPS models.
Environmental conditions for optimal UPS operation (temperature, humidity, altitude).
Physical dimensions and weight specifications for each UPS model.
Battery type, quantity, and backup time at different load levels.
Common problems and their solutions for the 1000H, 2000H, and 3000H models.
Common problems and their solutions for the 6000H and 10000H models.
Description of the UPS operation when utility power is available.
Description of the UPS operation when running on battery power.
Description of the UPS operation in bypass mode.
How the UPS indicates and operates during fault conditions.
Details of the RS232 communication port and its pin assignments.
Details of the optional AS400 interface card and its pin assignments.
Information on downloading and installing the WinPower monitoring software.
To Next Page
