Application Note Establish Ethernet connection between easyE4 and easySoft V7 04/2020 AP050013ENEN www.eaton.com 15
14. The current IP address of the easyE4 is offered for selection at Interface.
15. Go to "Online".
16. The easyE4 to which you are now connected is displayed on the desktop.
17. Transfer your project by clicking on "PC => Device".
NOTE: When downloading the *.e70 project, the IP settings from the register "Ethernet" (view
"Project") are transferred to the easyE4. If the IP settings in the project differ from those in the IP
profile currently used for the connection, the Ethernet connection to the easyE4 terminates im-
mediately after downloading the *.e70 project. If you want to establish a new connection, create
an IP profile as an interface with the IP settings transferred in the *.e70 project.
18. Start the program by clicking on "RUN".
To Next Page
Loading...
