Eaton easyE4 - 2 Network Settings of the PC

Application Note Establish Ethernet connection between easyE4 and easySoft V7 04/2020 AP050013ENEN www.eaton.com 3
2 Network settings of the PC
Check the network settings of your PC to ensure that the Ethernet connection described below can
function properly with the easyE4.
NOTE: In this application note a USB to Ethernet adapter is used to connect the easyE4
to the PC. You can also connect the easyE4 to your PC directly or via a switch.
Connect the easyE4 to your PC via Ethernet.
1. Open the Network and Sharing Center of your PC under Control Panel/Network and Internet.
1.