Eaton ELC-PB - Page 147

ELC Programming Manual
FOR MORE INFORMATION VISIT: WWW.EATON.COM MN05003003E
2-118
M1002
RST M0
SET
END
RST M1
SET M0
ALT M1
Y7
RST
RST
X0
X0
M0
M1
M1
M1
M1148
M0
X0
M0
M0
M0
M1144
Example 4: apply acceleration and deceleration of a segment to zero point return program.
1. Relative flag timing chart is shown in the following.
M1149
M1148
M1144
X0
Stop returning to zero point
Stop pulse output
Acceleration for
returning to zero point
Deceleration for
returning to zero point
2. The relation between frequency and position are shown in the following.