Eaton ELC-PB - Page 51

ELC Programming Manual
FOR MORE INFORMATION VISIT: WWW.EATON.COM MN05003003E
2-22
SM
Function
ELC
-PB
ELCB
-PB
ELC
-PC
-PA
-PH
ELCM
-PH
-PA
ELC
-PV
OFF
Ø
ON
STOP
Ø
RUN
RUN
Ø
STOP
Type Latched
Factory
setting
M1043
Zero point return completed
Y Y Y Y OFF - OFF R/W NO OFF
M1044
Zero point condition
Y Y Y Y OFF - OFF R/W NO OFF
M1045
All outputs clear inhibit
Y Y Y Y OFF - - R/W NO OFF
M1046
STL state setting (ON)
Y Y Y Y OFF - - R NO OFF
M1047
STL monitor enable
- Y Y Y OFF - - R/W NO OFF
M1048
Flag for alarm point state
- Y Y Y OFF - - R NO OFF
M1049
Monitor flag for alarm point
- Y Y Y OFF - - R/W NO OFF
M1050
I000/I001 masked
Y Y Y - OFF - - R/W NO OFF
M1051
I100/I101 masked
Y Y Y - OFF - - R/W NO OFF
M1052
I200/I201 masked
Y Y Y - OFF - - R/W NO OFF
M1053
I300/I301 masked
Y Y Y - OFF - - R/W NO OFF
M1054
I400/I401 masked
- Y Y - OFF - - R/W NO OFF
M1055
I500/I501 masked
- Y Y - OFF - - R/W NO OFF
M1056
I602~ I699 masked
Y Y Y - OFF - - R/W NO OFF
M1057
I702~I799 masked
- Y Y - OFF - - R/W NO OFF
M1058
COM3 monitor request
- - Y - OFF - - R/W NO OFF
I010~I060 masked
- Y - -
M1059
Disable high-speed counter interruptions
I010~I080
- - Y -
OFF - - R/W NO OFF
M1060
System error message 1
Y Y Y Y OFF - - R NO OFF
M1061
System error message 2
Y Y Y Y OFF - - R NO OFF
M1062
System error message 3
Y Y Y Y OFF - - R NO OFF
M1063
System error message 4
Y Y Y Y OFF - - R NO OFF
M1064
Operator error
Y Y Y Y OFF OFF - R NO OFF
M1065
Syntax error
Y Y Y Y OFF OFF - R NO OFF
M1066
Program error
Y Y Y Y OFF OFF - R NO OFF
M1067
Program execution error
Y Y Y Y OFF OFF - R NO OFF
M1068
Execution error latched (D1068)
Y Y Y Y OFF - - R NO OFF
Y1 time base switching for PWM
instruction (ON: 100us; OFF: 1ms)
Y Y Y -
M1070
Y0 time base switching for PWM
instruction (ON: 100us; OFF: 1ms) when
ON, D1371 will decide the time base)
- - - Y
OFF - - R/W NO OFF
M1090
Matrix search start flag. Compare from
the first bit and M1090=1.
- Y Y Y OFF OFF - R NO OFF