2. Programming Concepts
MN05003003E For more information visit: www.eaton.com
2-63
Special D
Function
ELC
-PB
ELCB
-PB
ELC
-PC
-PA
-PH
ELCM
-PH
- PA
ELC
-PV
OFF
Ø
ON
STOP
Ø
RUN
RUN
Ø
STOP
Type Latched
Factory
setting
D1198
ELC-PH: When Interrupt X5 / I501
happens, D1198 will store the low
word of high-speed counting value.
ELC-PC/PA: When interrupt X3 / I301
happens, D1198 will store the low
word of high speed counting value at
X1.
- Y - - 0 - - R NO 0
D1199
ELC-PH: When Interrupt X5 / I501
happens, D1199 will store the high
word of high-speed counting value.
ELC-PC/PA: When interrupt X3 / I301
happens, D1199 will store the high
word of high speed counting value at
X1.
- Y - - 0 - - R NO 0
D1200
Start address of M0~M999 auxiliary
relay latched
- Y - Y - - - R/W Yes 512
D1201
End address of M0~M999 auxiliary
relay latched
- Y - Y - - - R/W Yes 999
D1202
Start address of M2000~M4095
auxiliary relay latched
- Y - Y - - - R/W Yes 2000
D1203
End address of M2000~M4095
auxiliary relay latched
- Y - Y - - - R/W Yes 4095
D1204
Start latched address for 100ms timers
T0 ~ T199
- - - Y - - - R/W YES H'FFFF
D1205
End latched address for 100ms timers
T0 ~ T199
- - - Y - - - R/W YES H'FFFF
D1206
Start latched address for 10ms timers
T200 ~ T239
- - - Y - - - R/W YES H'FFFF
D1207
End latched address for 10ms timers
T200 ~ T239
- - - Y - - - R/W YES H'FFFF
D1208
Start latched address of 16-bit counter
C0~C199
- Y - Y - - - R/W Yes 96
D1209
End latched address of 16-bit counter
C0~C199
- Y - Y - - - R/W Yes 199
D1210
Start latched address of 32-bit counter
C200~C234
- Y - Y - - - R/W Yes 216
D1211
End latched address of 32-bit counter
C200~C234
- Y - Y - - - R/W Yes 234
D1212
Start latched address of 32-bit high-
speed counter C235~C255
- Y - Y - - - R/W Yes 235
D1213
End latched address of 32-bit high-
speed counter C235~C255
- Y - Y - - - R/W Yes 255
D1214
Start latched address of step point
S0~S1023
- Y - Y - - - R/W Yes 512
D1215
End latched address of step point
S0~S1023
- Y - Y - - - R/W Yes 895
D1216
Start latched address of register
D0~D999
- Y - Y - - - R/W Yes 200
D1217
End latched address of register
D0~D999
- Y - Y - - - R/W Yes 999
D1218
Start latched address of register
D2000~D4999
- Y - Y - - - R/W Yes 2000