Eaton Ellipse ECO 800 - Quick Start Guide

4
Quick start
E
F
Register warranty at: www.eaton.com/ellipse-eco
USB models
Battery change
l Warning: take care not to inverse the polarity + (red) and - (black) when connecting the batteries as this will
destroy the device.
a
b
c
d
e
a
b
c
d
e
Ellipse 500 / 650 / 800
Ellipse 1200 / 1600
Battery disposal and safety
l Caution. Battery service life is reduced by 50 % for
every ten degrees above 25 °C.
l The battery elements must be replaced exclusively
by qualied personnel (risk of electrocution), with
new elements approved by EATON to ensure correct
operation of the UPS.
l The battery must be disposed of in accordance
with applicable regulations. To remove the battery
elements, shut down the UPS (button
12
OFF), remove
the power cord and proceed as indicated in page 4
"Battery change".