Eaton Ellipse PRO 850 - Battery Disposal and Safety; Battery Change Procedure

4
Battery change
• Warning: take care not to inverse the polarity + (red) and - (black) when connecting the battery as this will destroy
the device.
a
b
c
d
e
c
b
e
f
a
d
650 / 850
1200 / 1600
Battery disposal and safety
• Caution. Battery service life is reduced by 50 % for every ten degrees above 25 °C.
• The battery must be replaced exclusively by qualied personnel (risk of shock), with new battery approved by
Eaton to ensure correct operation of the UPS.
• The battery must be disposed of in accordance with applicable regulations. To remove the battery, shut down the
UPS (button
6
OFF), remove the power cord and proceed as indicated below "Battery change".