Eaton EMT6-K - Fitting the Device

3 Installation
3.2 Fitting the device
EMT6 10/16 MN03407006Z-DE/EN www.eaton.com 47
3.2 Fitting the device
The EMT6... can be mounted in any required position.
Figure 4: Mounting position of EMT6
As an alternative to DIN-rail mounting, the device can be screw-fixed by
using a CS-TE adapter.
Figure 5: Mounting an EMT6 overload relay for machine protection
90°
90°
90°
90°
Z2
2 x M4
56 mm (2.2”)
CS-TE
XTTRXBASE