Eaton EVER-Tap - Page 7

MOV-type series arrester
Bushing
connectors
Threaded-stud
bushing terminals
Bushings
Lifting eyes for
untanking
Ball-type 25 C° insulating
fluid level sight gauge
Regulator lifting lugs
Upper filter press
connection
Laser-etched nameplate (2)
(second nameplate on
control enclosure door)
CL-7 control
Not shown:
• Automatic pressure-
relief device
• Pole-mounting bracket
(units up to 250 kVA)
Drain valve and insulating
fluid sampling device
Ground pad
Junction box
Hand-hole cover
Cover
Position indicator
Shunt-arrester
mounting bosses
Control cable with
Quick-Disconnect plug
Lockable control enclosure
Tap-changer motor capacitor
Control ground boss
Bolt-down provisions (4)
Substation base (available
in units 167 kVA and above)
Figure 2. External features of the VR-32 and EVER-Tap voltage regulator
3
VR-32 and EVER-Tap™ Voltage Regulator
InstallatIon, operatIon, and MaIntenance InstructIons MN225008EN June 2020