Part Number / Options Selection Guide
Diesel Plus Engine Controller
Technical Data PA081004EN
E ective April 2015
FD120
FDF120
Language DIESEL Plus Options
L1 = English 380* - Supply Voltage (380V 50/60Hz)
L2 = French 480* - Supply Voltage (480V 60Hz)
L4 = Italian 600* - Supply Voltage (600V 60Hz)
L5 = Spanish COM - Communications Option
L6 = Portuguese CX - Extra Contacts (Two Form-C; Specify Function)
L7 = Chinese E1 - NEMA 3R - Raintight Enclosure
L8 = Polish E2 - NEMA 4 - Watertight Enclosure
L9 = Dutch E3 - NEMA 12 - Dust Tight Enclosure
L11 = Turkish E5 - NEMA 4X - 304 Stainless Steel
E8 - Tropicalization
E9 - NEMA 4X - Painted Steel
E10 - NEMA 4X - 316 Stainless Steel
EX - Export Crating
F2 - Floor Stand - 2 Inch Height **
LO - Powered Louver Contacts - (1.6 Amp Max)
LO+ - Powered Louver Contacts - (Up to 8.0 Amp)
LX - Extra Light (Specify Description)
Ni - Ni Cad Batteries
P5 - Proof Pressure Switch - ALCO - 19-250 PSI
P7 - Low Suction Pressure Switch
P8 - Shutdown (Requires P7 Option)
P10 - Pressure Transducer - Sea Water
P13 - Externally Mounted Pressure Transducer **
R1 - Space Heater (120 / 220V)
R2 - Space Heater c/w Thermostat
R3 - Space Heater c/w Humidistat
R4 - Low Room Temperature Switch ***
R5 - Space Heater (Internally powered - 120V / 240V)
S1 - Fuel Level Switch, 16 Inch
S2 - Fuel Level Switch, 45 Inch
S3 - Fuel Level Switch, High-Low
USB - Externally Mounted USB Port
X1 - Printer
X2 - 4 Inch Chart Recorder (10 - 300 psi fresh water)
Note: All controllers are factory set for 12Vdc operation,
unless otherwise noted on the purchase order.
* Standard voltage supplied: 110 / 220V 50/60Hz
** Not available for NEMA 4 or NEMA 4X units.
*** When ordered with a NEMA4 / 4X enclosure, the
temperature switch is shipped loose with 20 feet of wire.