Eaton i-onEX Series - Page 100

4. Administration i-on40 & i-onEX Range
Page 94
d) Press .


e) Press  or . until the bottom line of
the display shows:


f) Go on to step 8.
If you are a Normal User:
6. Press .


7. Press  until the display shows:


8. Press .
The display shows:


9. Press .
The display shows:


a) Press  or  to scroll through the
list of partitions.
On the bottom line of the display
“Yes” means that the two-way
keyfob is assigned to the partition,
“No” means that the two-way keyfob
is not assigned to the partition.


b) Press  to change the “Yes” to a
“No” or back again.
See page 4 for a description of
partitions.


c) Press  when you have finished re-
assigning the two-way keyfob to its
partitions.


10. Press  repeatedly to leave the
menu.