Eaton i-onEX Series - Setting the Date and Time

i-on40 & i-onEX Range 4. Administration
Page 73
9. Press  when you have finished
making changes.
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:


Setting the Date and Time
You will need to re-program the date and time if the control unit loses
power for an extended time, and the battery is exhausted.
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press  until you see:.


5. Press .
The bottom line of the display
shows:


6. Press  until the display shows:


7. Press .
The top line of the display shows
“Set the date” and the bottom line
shows the current date in number
format (day/month/year). The day
is highlighted.


8. Key in the correct date. Use the
format dd/mm/yyyy. If the days or
months are “9” or less then key in a
leading zero. For example: the first
of March will be 01/03/2010.


9. Press .
The top line of the display shows
“Set the Time” and the bottom line

