Eaton i-onEX Series - Setting

3. Setting and Unsetting i-on40 & i-onEX Range
Page 22
Setting
1. Starting to Set
Do this:
The display shows:
a. Make sure the system is idle.
Secure all the windows and doors.
(The top line may show the
installer’s name.)


b. Either key in your access code.
As you key in your code the
display shows a “*” for each digit.


OR present your tag.
Quick Set:
Quick set removes the need to use an access code or tag to start setting.
The installer must enable this facility for you. (Note that in order to make
the alarm system comply with certain regulations the installer may not be
allowed to provide this facility.)
Do this:
The display shows:
a. Press A, B, C or D.
The system starts the exit
process, there is no need to select
what to set.
Go to: 3. Finishing Setting.


2. Selecting What to Set:
Part Setting Systems
Do this:
The display shows:
The bottom line of the display
shows the first item in the setting
options menu.
↕

a. Press  or  to select the option
you want.
↕
